Basic Lytespan ®1 Circuit Track 6000

Basic - Individual Track

Includes Live End and Dead End Cover, surface mounting clips and hardware.
Width 1 5/32"
Height: 3/4"

• 2 foot
• 6000NWH Matte White
• 6000NBK Matte Black

• 4 foot
• 6001NWH Matte White
• 6001NBK Matte Black

• 8 foot
• 6002NWH Matte White
• 6002NBK Matte Black

Basic Lytespan is a one circuit electrical distribution system designed to
support and supply all Lytespan lighting units in a flexible manner. The
track can be installed individually in straight runs or in a variety of patterns.

1. Basic Lytespan Track: 6063-T5 structural aluminum extrusion.
2. Track Mounting Clips: 0.024 Spring steel, in black or white;
   furnished with track units.
3. Toggle Bolt & Screws: furnished with track units.
4. Conductor (2): copper 12 ga. equivalent. "U" shape provides
   reliable contact with connectors.
5. Insulating Liner: 0.032" wall, high temperature thermoplastic.
6. Polarity Bead: identifies the neutral conductor.
7. Live End: molded thermoplastic. Contains contacts for power
   supply leads.
8. Dead End Cover: molded thermoplastic.
9. Mini Coupler: connects track units mechanically and electrically.

The track may be surface or stem mounted (see pages 2, 3, and 4) or
installed in a recessed housing (see Specification sheet 7515). The
track is not intended to be cable mounted. All lengths can be field cut.

All painted finishes are baked enamel. Raw Aluminum finish is clear
anodized and furnished with black conductors.

Capacity is 20 amps. at 120 volts per branch circuit (2400 watts
incandescent load). The track units are polarized and continuously
grounded throughout. Electrical conductors are concealed in a
insulating liner. Intended for wiring to branch circuit building wire
with ground. All wiring must be in accordance with National and
Local Codes.

Track units plug together and lock securely to prevent accidental
separation. Lytespan lighting units can be attached at any point along
the track.