1104F2632ES - 6 3/4”Aperture
1 Lt. 26/32W Quad/Triple Tube Compact Fluorescent Insulated Ceiling, AirSeal Frame-In Kit

• Dimensions: Length: 10 3/4", Width: 7 5/16", Height: 7 1/2"
• Hanger bar length: 13" min, 24" max
• Ceiling Opening: 7"

1. Housing: .032” (#20 ga.) UL listed for direct contact with thermal insulation.
   Allows installation in ceilings up to 2" thick. Can be removed for access
   to junction box, ballast and ceiling plenum. AirSeal® housing minimizes
   air leakage to less than 2 CFM at 1.57 PSF (or 75pa), which complies with
   Model Energy Code (Section 602.3.3) and Washington State Energy Code
   (Section 502.4) and reduces heat loss and condensation in ceiling.
2. Mounting Frame:.048” (#18 ga.) galvanized steel. Locks into position along
   length of mounting bars with locking spring and bendable slot. (3) slots 90°
   apart simplify alignment.
3. Junction Box:2" X 4" X 3 1/2" (22 cu. in.) .032" (#22 ga.) galvanized steel.
   UL listed for branch circuit wiring supplying connected luminaires. Integral
   cable clamps permit attachment of non-metallic (#12 or #14 ga.) Romex®
   cable without tools or additional connectors.
4. Mounting Bars: .059” (#16 ga.) galvanized steel. Bars pivot for easy
   attachment and wire-in below ceiling line. Bars extend to accommodate 16"
   to 24" O.C. joist spacing. Bars can accommodate 9" O.C. joist spacing after a
   slight field modification (see Instruction Sheet). Features integral
   self-tapping phillips screws for secure attachment to wood or metal
   construction. Attaches to T-bar ceilings without the need of accessories.
5. Socket Housing: Trim retaining spring secures trim to any height on housing wall.
6. Socket: (4 Pin, GX24q-3) base, molded thermo-plastic. Pre-wired with #18
   AWG leads to junction box.
7. Ballast: Electronic 120V, end of life protected, FCC class “B” consumer
   limits, class “A” sound rating. Energy Star® qualified.

UL (Type IC Suitable for Damp Locations)
Complies with Air Leakage Requirements stated in the Model Energy
Code and the Washington State Energy Code.