H1T - 9" Non-IC Square Incandescent 120V

A versatile 8 1/2" square aperture fixture for use with 100W A19 incandescent lamps.
The H1T is complete with a built-in aluminum reflector, plaster frame, and feed-through
junction box. Suitable for either residential or commercial applications, the H1T provides
an economical housing choice with square trims.

Reflector

• One piece die formed 20 gauge aluminum reflector.

Plaster Frame

• 20 gauge steel
• Reflector adjusts 3/4" in plaster frame

Socket

• Porcelain socket with nickel plated screw shell for medium base incandescent lamps.

Bar Hangers

• Fully adjustable bar hangers span 24" joists.
• Housing may be positioned at any point along length of fully extended bars.
• May be repositioned 90 degrees
• Bar hangers fit into T-bar spine for quick alignment and may be permanently
  secured with optional TB-7 T-bar grid clip (set of 4 sold separately).

Junction Box

• UL listed for through branch circuit wiring with eight no. 12 branch circuit conductors
  suitable for at least 90 degrees C (four in, four out).
• Six easy to remove 1/2" pryouts allow junction box access from top and sides.
• Four pryouts with integral strain relief simplify installation of non metallic sheathed cable.

Thermal Protector

• Provides protection against improper use of ceiling insulation.

Labels

• UL/cUL listed for damp locations
• UL/cUL listed for Feed Through
• IP rated