Lytening Convertible (IC/Non-IC) Remodeler
5" Aperture

For standard residential and light commercial incandescent applications
For use in insulated or non-insulated existing ceilings up to 2" thick.
Convertible to AirSeal with accessory gasket kit.
Ceiling opening 5 3/8” diameter

Compatible Trims: 1005, 1005WH, 1076, 1076WH, 1013, 1013BK, 1013CD, 1013WH, 1022, 1022WH.

1. Housing: .032 (#20 ga.) Aluminum. U.L. listed convertible IC/NON-IC.
   Integral retaining spring secures housing to ceilings up to 2” thick.
   Removable for access to junction box and ceiling plenum.
2. Junction Box: 2 1/2” X 2 1/2” X 3 1/2” (21 cu. in.) .032 (#22 ga.) galvanized steel.
   U.L. listed for 90°C supply wire. Integral cable clamps permit attachment of
   non-metallic (#12 or #14 ga.) Romex® cable without tools or additional connectors.
3. Socket Housing: Impact extruded aluminum or galvanized steel.
   Attached trim retaining spring secures trim to any height on housing wall.
4. Socket: Porcelain medium base: nickel plated screw shell.
   Pre-wired with #18 ga. SF1 (300 VOLT 200°C) leads to junction box.
5. Thermal protector: Meets NEC and U.L. requirements. Located inside housing.