|
H1499IC AIR-TITE™ IC HOUSING
4" Insulated Ceiling
AIR-TITE ™ Low-Voltage Recessed Housing
Compatible Trims: 1493P, 1493W, 1419P, 1420P, 1421C, 1951PS.
For insulated ceilings and
direct contact with
insulation
Integral low voltage
transformer
AIR-TITE housing prevents
airflow between attic and living areas
Small aperture low voltage AIR-TITE™ housing for task and accent lighting where housing will be in direct contact with insulation.
The AIR-TITE construction limits air exchange between the plenum and heated or air conditioned areas.
Integral thermal protector guards against improper lamping.
Double wall housing construction.
Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts with true pry-out slots
Four Romex pry-outs with integral strain relief.
Pre-installed, captive bar hangers allow housing to be positioned at any point within a 24" joist span.
Unique arrowhead design provides “Nailess” installation.
Bar hangers can be repositioned 90° without tools.
Hangers fit onto T-Bar spline for quick alignment and can be permanently secured with optional TB7 T-Bar clip.
120V magnetic transformer for lamps up to 50W.
7 1/4" Height allows use in 2"x 8" joist construction.
Housing can be removed from plaster frame for junction box and transformer access.
Housing adjusts for ceilings up to 1" thick.
UL Damp Location
UL Feed Through
CSA Certified
IP Rated
Meets State of California Title 24 requirements
Meets State of Washington Restricted Air Flow Requirements
|
